Vari-watt Box mod


Vari-watt (VW) is a plane, which as distinct from varivolt, independently keep the set spiral capacity, regardless of vaporizer's resistance. Otherwise speaking, it is the simple automatics. Electronic chip vari-vatt has pre-emptively built-in algorithm or regulating the voltage depending on found resistance of atomizer. And now depending on resistance it independently forward one or other voltage. It means that Vari-watt mode also account for voltage like Vari-volt.

Click to order
Cart
Write to us - it's easy! Please fill in the box with the e-mail address correctly! You will receive an answer to your mail within 24 hours.
Total: 
mail
name


Case material: hybrid, acrylic, stabwood
Filling: DNA 75c / DNA75
Power supply: 1 * 18650/20650/20700/21700
510 spring-loaded connector
Aluminum panel
Buttons hybrid, acrylic, stabwood
Hot swappable battery

Size: 91*46*25 mm
Material: Stabwood
Internals: DNA75/75c
Batteries: 1x18650
Specifications
Spring-loaded mounted 22mm connector (takes atties up to 24mm without overhanging)
Stabwood Buttons
Quick swap of batteries

Case Material: Stubwood / Acrylic / Hybrid / Stabwood
Filling: DNA 250s
Power supply: 2 * 18650/20650/20700/21700
Description:
510 spring-loaded connector
Aluminum panel
Buttons stabwood / acrylic / hybrid / Stubwood


Case Material: Hybrid
Filling: DNA 250s
Power: LiPo 2800 3s 100s (on order any other kinds)
Description:
510 spring-loaded connector 22 mm (recessed)
Aluminum panel (powdered)
Buttons made of acrylic

Case Material: Stubwood
Filling: DNA 250 (167 watts)
510 spring-loaded connector v4 (22mm recessed)
Hot swappable batteries
Battery compartment for 18650 batteries
Buttons from Stubud

Case Material: Stubwood / Acrylic / Hybrid / Stabwood
Filling: DNA 250s
Power supply: 2 * 18650/20650/20700/21700
Okhornleni: stylized under Hexohm V3
Description:
510 spring-loaded connector
Aluminum panel
Buttons stabwood / acrylic / hybrid / Stubwood

Case Material: Aluminum 6061
Filling: DNA 200/250 / 250c
Description:
510 spring-loaded connector
Hot swappable batteries
Battery compartment 18650/20650/20700/21700
Engraving on the sketch

Case Material: Acrylic / Hybrid / Stabwood
Filling: DNA 200/250 / 250c
Power: LiPo 1500 (under the order any other kinds)
Description:
510 spring-loaded connector
Aluminum panel
Acrylic / hybrid / Stubwood buttons

Evolv dna

Evolv dna
New plane DNA 250 has the same as size as previous one DNA 200. The usage up to 3 storage batteries with the plane is possible. Also the disposition of screen, buttons and USB receptacle is saved. There are few peculiarities.

The highest capacity grew up to 250 W; it's obvious from the name of the plane. 60 A is a restriction of output current. Ampere is an input restriction for charging the storage batteries with USB. The plane is protected against incorrect adjustment of a storage battery. A safeguard is enhanced. Temperature control for stainless steel materials is added, and it is a part of software and its updating is available for DNA 200 and DNA 75.

It is clear from the description, that this plane is more forceful and that's why the additional defense was added. Also 2 A battery chargers make us happy. Although you should remember that the plane will be used with 3 storage batteries and the charge will be divided among 3 of them. It means that every storage battery will get 0, 65 A.

Made on
Tilda